© 2020 Riddhi Enterprise. All Rights Reserved
Fibre Glass Mesh is used where two materials with different coefficient of expansion come together. E.g. joints of masonry, reinforced cement concrete, stone etc. Fibre Glass Mesh absorbs tension and forms a flexible, yet extremely tough durable layer with a plaster, facilitating adherence to variety of masonry materials. Unlike metal or plastic based alternatives (chicken mesh) Fibre Glass Mesh doesn’t break down due to corrosion, is easy to use and pile, cuts effortlessly and lies flat. Fibre Glass Mesh exceeds all the requirements of tensile strength and resistance to acid, salts, water and alkali. Fibre Glass Mesh comes with alkali resistance properties and provides reinforcement against impact.
Fibre Glass Mesh is used where two materials with different coefficient of expansion come together. E.g. joints of masonry, reinforced cement concrete, stone etc. Fibre Glass Mesh absorbs tension and forms a flexible, yet extremely tough durable layer with a plaster, facilitating adherence to variety of masonry materials. Unlike metal or plastic based alternatives (chicken mesh) Fibre Glass Mesh doesn’t break down due to corrosion, is easy to use and pile, cuts effortlessly and lies flat. Fibre Glass Mesh exceeds all the requirements of tensile strength and resistance to acid, salts, water and alkali. Fibre Glass Mesh comes with alkali resistance properties and provides reinforcement against impact.
Fibre Glass Mesh is used where two materials with different coefficient of expansion come together. E.g. joints of masonry, reinforced cement concrete, stone etc.
Fibre Glass Mesh absorbs tension and forms a flexible, yet extremely tough durable layer with a plaster, facilitating adherence to variety of masonry materials. Unlike metal or plastic based alternatives (chicken mesh) Fibre Glass Mesh doesn’t break down due to corrosion, is easy to use and pile, cuts effortlessly and lies flat.
Fibre Glass Mesh exceeds all the requirements of tensile strength and resistance to acid, salts, water and alkali.
Fibre Glass Mesh comes with alkali resistance properties and provides reinforcement against impact.
FIBRE GLASS MESH CUT ROLL Protects the surface from cracking and improves its mechanical strength.
FIBRE GLASS MESH CUT ROLL is Easy to handle and use.
FIBRE GLASS MESH CUT ROLL has High resistance to tearing and stretching,
FIBRE GLASS MESH CUT ROLL does not emit toxic and harmful substances,
FIBRE GLASS MESH CUT ROLL is Resistant to Alkalis,
FIBRE GLASS MESH CUT ROLL does not decompose and will not rust over time.
• Protects the surface from cracking and improves its mechanical strength.
• Easy to handle and use.
• High resistance to tearing and stretching,
• It does not emit toxic and harmful substances,
• Resistant to Alkalis, does not decompose and will not rust over time,
• Protects the surface from cracking and improves its mechanical strength.
• Easy to handle and use.
• High resistance to tearing and stretching,
• It does not emit toxic and harmful substances,
• Resistant to Alkalis, does not decompose and will not rust over time,
We offer geotextile fabric that has the right permeability to ensure that the sand is properly filtered or drained. The properties of our fabric make it an ideal product for various applications like assisting in drainage, controlling erosion, and even increasing the stability of soil. It is available in all forms to aid stabilization, filtration, and separation. You can count on us for your requirement of wholesale geotextile fabric in India. Our staff has been trained to ensure the fabric has a precise composition.
• Protects the surface from cracking and improves its mechanical strength.
• Easy to handle and use.
• High resistance to tearing and stretching,
• It does not emit toxic and harmful substances,
• Resistant to Alkalis, does not decompose and will not rust over time,
Glass Fiber is a monofilament glass fiber with Engineering Properties. Millions of mono fibers get uniformly disperse in every cubic meter of Concrete/Mortar and develop Micro Secondary Reinforcement (MSR) system. Glass Fiber improves Quality, Durability and Service life of Structure. We at Riddhi Enterprise offer quality Glass Fibers that are produced by chopping dry fiberglass into certain length. The Glass Fiber are coated with silica based coupling agent system and are compatible with different resins. The Glass Fibers are mainly used in the automobile industry, home appliances, valves, pump housing, chemical corrosion control and sports equipment. Glass Fibers can also be used for reinforcing cement with the main process of pre-mixing and spraying. We provide Glass Fibers in range of 6 mm, 12 mm,24 mm, 36mm.
Glass Fiber is a monofilament glass fiber with Engineering Properties. Millions of mono fibers get uniformly disperse in every cubic meter of Concrete/Mortar and develop Micro Secondary Reinforcement (MSR) system. Glass Fiber improves Quality, Durability and Service life of Structure. We at Riddhi Enterprise offer quality Chopped Strand that are produced by chopping dry fiberglass into certain length. The strands are coated with silica based coupling agent system and are compatible with different resins. The chopped strand are mainly used in the automobile industry, home appliances, valves, pump housing, chemical corrosion control and sports equipment. This can also be used for reinforcing cement with the main process of pre-mixing and spraying. We provide chopped strands in range of 6 mm, 12 mm,24 mm, 36mm.
Glass Fiber is a monofilament glass fiber with Engineering Properties. Millions of mono fibers get uniformly disperse in every cubic meter of Concrete/Mortar and develop Micro Secondary Reinforcement (MSR) system. Glass Fiber improves Quality, Durability and Service life of Structure. We at Riddhi Enterprise offer quality Chopped Strand that are produced by chopping dry fiberglass into certain length. The strands are coated with silica based coupling agent system and are compatible with different resins. The chopped strand are mainly used in the automobile industry, home appliances, valves, pump housing, chemical corrosion control and sports equipment. This can also be used for reinforcing cement with the main process of pre-mixing and spraying. We provide chopped strands in range of 6 mm, 12 mm,24 mm, 36mm.
Glass Fiber is a monofilament glass fiber with Engineering Properties. Millions of mono fibers get uniformly disperse in every cubic meter of Concrete/Mortar and develop Micro Secondary Reinforcement (MSR) system. Glass Fiber improves Quality, Durability and Service life of Structure. We at Riddhi Enterprise offer quality Chopped Strand that are produced by chopping dry fiberglass into certain length. The strands are coated with silica based coupling agent system and are compatible with different resins. The chopped strand are mainly used in the automobile industry, home appliances, valves, pump housing, chemical corrosion control and sports equipment. This can also be used for reinforcing cement with the main process of pre-mixing and spraying. We provide chopped strands in range of 6 mm, 12 mm,24 mm, 36mm.
Flashband is a self-adhesive sealing strip which bonds instantly to provide a permanent watertight seal.
Flashband is easily applied using hand pressure only, with no requirement for special equipment for cutting, forming or fixing. Flashband bonds to most building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, roofing felt, glass, rigid plastics and more.
Porous surfaces need to be primed with a Flashband primer. Applications include repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering, and repairing roofing felt joints on flat roofs.
Flashband is a self-adhesive sealing strip which bonds instantly to provide a permanent watertight seal.
Flashband is easily applied using hand pressure only, with no requirement for special equipment for cutting, forming or fixing. Flashband bonds to most building materials including brick, masonry, slates, concrete roof tiles, wood, metal, concrete, terracotta tiles, roofing felt, glass, rigid plastics and more.
Porous surfaces need to be primed with a Flashband primer. Applications include repairing lead flashing, sealing valley gutters, mending leaks in drain pipes and guttering, and repairing roofing felt joints on flat roofs.
PP PE waterproofing membrane is a composite sheet membrane made of soft polyethylene(PE) with nonwoven polypropylene(PP) fabric laminated on both sides to enable the membrane fixed firmly onto mortar.
PP PE waterproofing membrane is flexible and conforms to various contours of the wood framing, bending upward at the walls and folding into corners. It can be applied directly with thin-set mortar, ceramic and stone tile, provides waterproofing and crack isolation/joint bridging for thin-set installations of ceramic and stone tile. It has been an ideal membrane to protect the substrate from moisture penetration.
PP+PE+PP composite waterproof membrane is made by multiple-ply different materials, especially its aging and weathering resistance layer enables the membrane possess more longer effective age. It can bond with many kinds of adhesions, firm and secure. In case of cement-base, cementations agent can be used, the cementations agent can easily enter into the non-woven felt layer, forms a well-combination with cement after solidification, permanent durability.
1. Non-toxic, no pollution, environmental protecting product.
2. Can be used for many different surfaces, especially for cement basement.
3. Tough, impermeable, multi-layered sheet;
4. High tension strength, good cold flexibility.
Anti-Crak® HP (High Performance) 58/12 is a glass fiber made from
AR (Alkali Resistant) glass filaments and engineered to reinforce concrete and mortar against cracking.
Anti-Crak® HP 58/12 has an excellent bond with hydraulic matrices and increases its tensile strength before cracking.
Anti-Crak® HP 58/12 is suitable for all types of concrete formulations and mixing methods due to its specific size, which allows for excellent dispersion of fibers, easy processing, and a very high quality finish.
Product application
Anti-Crak® HP 58/12 was developed to improve resistance against cracking in concrete and mortar. It is mainly used to reinforce screeds, and in residential, commercial, and industrial floor slabs
It is a single component elastomeric polyurethane sealant for expansion joints. lt cures into a flexible, durable and weather resistant elastomeric sealant that has very good adhesion to most construction materials. It is highly durable, excellent adhesion which requires no priming on most substrates. It bears very good ageing, weatherproofing and waterproofing properties.
X-Seal PU25 is a fast-curing one-component moisturecuring polyurethane adhesive sealant that turns into a
flexible, durable and resistant elastomeric seam and has
a very good adhesion to most industrial materials,
without primer such as glass, anodized aluminum,
lacquered metal, wood, FRP, and concrete.
Bostik Seal "N" Flex® 1 is a low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough and flexible seal capable of cyclic expansion and compression movement of 100% (+ 50%) of the original installed joint width.
CICO Seal T 680 Polysulphide is two pack Polysulphide based joint sealant available in GUN GRADE and POUR GRADE. CICO Seal T 680 Polysulphide gun grade is a gun-applied, non-sag type for vertical joints and CICO Seal T 680 Polysulphide pour grade is for horizontal movement joints. When two packs are mixed, i.e. Polysulphide resin (Pack-A) with curing agent (Pack-B), it forms a tough, flexible, durable rubber like material with strong adhesive properties on most building substrates and joints.
A liquid mid-range water-reducing cum water proofing concrete admixture with a powerful plasticizing effect. Also, a substantial water reduction can be achieved to promote high ultimate strengths at the high dosage range.
Sikament®-4101 NS Imparts high workability and gives workability retention.
SikaPlast® 5203 NS is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers.
SikaPlast® 5203 NS is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers.
A concrete / mortar admixture in liquid form that acts
both as a plasticizer and waterproofing compound.
USES
Sika® Plastocrete® Plus is recommended for use in
structural concrete such as:
▪ Sloped Roof Slab
▪ Flat Roof Slab
▪ Beams
▪ Columns
▪ Slabs etc
Also used in:
▪ Internal and external plaster of buildings etc.
▪ Repair and renovation
CICO NO.3 is high versatile free flowing colorless concrete additives in liquid
form. It is used as quick setting cum rapid hardening admixture for concrete
and plaster. This is also used as Antifreeze/deicing compound for plain
concrete in sub zero climatic conditions.
SikaGrout®-214 IN S is a cement based 1-component, ready to mix, non-shrink, ready to use, pourable and flowable, expanding engineering grout in dry powder form. It is widely used for precision grouting in engineering objects subjected to static and dynamic loads.
Kerapoxy is a two-component, very low emission of volatile organic compounds, epoxy-resin-based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. The following features are obtained when used correctly:
• Excellent mechanical and chemical resistance, therefore excellent durability.
• A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene.
• Easy workability and finishing.
• Becomes very hard and is highly resistant to heavy traffic.
• No shrinkage, therefore absence of cracks and fissures.
• Uniform colours that are resistant to ultra-violet rays and atmospheric agents.
• Excellent bonding.
LOKFIX is a two-component polyester resin anchoring grout, meeting the requirements of BS EN 1504-6: Anchoring of reinforced steel bars.
BOSS® 333 is a ready-to-use, multi-purpose, polyurethane foam that expands to three times its original volume on contact with air. The expanding action fills holes, cracks and gaps more completely than standard caulks. BOSS® 333 has excellent insulating properties and superb adhesion to virtually all building materials
Polyethylene foam joint rod typically used in the for filling expansion joints prior to sealing. Poly backer rod can be used in many substrates, such as concrete, brick or block work and metals. The foam backing rod helps to prevent a joint from failing and significantly reduces the amount of sealant being used. Our backer rod does not rot and is chemically neutral.
Non absorbent compressible white closed cell polyethylene foam backup material.
Sikadur-Combiflex® SG-10 P is a flexible waterproofing
tape based on modified flexible Polyolefin (FPO) with
advanced adhesion properties. Thickness 1,0 mm.
The product is part of the Sikadur Combiflex® SG System.
Soudafoam 1K is a one-component, selfexpanding, ready to use polyurethane foam with CFC-free propellants, which are completely harmless to the ozone layer.
SikaLatex® Power is a synthetic rubber emulsion which
when added to cement slurry/ cement mortar/concrete/grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully
soluble in water and is to be added directly to the
gauging water of mortar/concrete/ cementitious
grout.
SikaRep® Microcrete-4 is factory designed pourable,
non shrink, repair concrete with selected cement, aggregate and other chemicals. Recommended water
and coarse aggregate to be added at site as per requirement.
APCOBUILD MICRO REPARIO
APCOBUILD MICRO REPARIO45
A Surface Treatment System for Protecting Concrete & Masonry
CICO TAPECRETE P-151, popularly known as
TAPECRETE is an acrylic based Polymer
Modified Cementitious Flexible Composite
coating system. CICO TAPECRETE P-151 in
conjunction with cement provides properties
to combat the shortcomings of plain cement,
particularly its poor adhesion properties, low
impact strength, low flexural strength and thin
section fragility. CICO TAPECRETE P-151
polymer adds to the potential use as well as
enhances the properties of cement slurry/
mortar/concrete making them excellent
choice for use in new as well as renovation
work.
Concure WB is a white, low viscosity wax emulsion which
incorporates a special alkali reactive emulsion breaking
system. This system ensures that the emulsion breaks
down to form a non penetrating continuous film immediately
upon contact with a cementitious surface. This impervious
film prevents excessive water evaporation which in turn
permits more efficient cement hydration, thus reducing
shrinkage and increasing durability.
Once formed, the membrane will remain on the concrete
surface until eventually broken down and eroded by natural
weathering. Where it is required to apply a further treatment
to such concrete surface, it may be necessary to remove the
membrane remaining after curing by wire brushing or other
mechanical means.
Uses
Brushbond RFX is an high performance elastomeric cementitious coating used for waterproofing and to protect atmospherically exposed reinforced concrete structures from attack by
acid gases, chloride ions, oxygen & water. Brushbond RFX
is suitable for all types of structures including those in coastal
environments.
The product can be used on concrete, brick and blockwork substrates and is equally suitable for new and existing structures.
The product is designed to reface and even out variations in
concrete and masonry surfaces and bridge shrinkage cracks.
It provides a seamless, fl exible waterproof coating suitable for
water tanks, reservoirs, drainage culverts basements, roofs,
toilets & wet areas. The product provides a tough durable water
resistant coating which can withstand light pedestrian traffi c and
also has excellent weather resistance for exterior applications.
Advantages
Excellent barrier to carbo n dioxide, chloride
and sulphate ions.
Allows water vapour to escape from the structure.
Waterproof-suitable for water retaining structures.
High resistance to the effect of long-term weathering,
durable in all climate conditions including UV attack.
Non toxic - ideal for potable water tanks.
Flexible, with thermal expansion similar to concrete.
Excellent bond to concrete and masonry.
Good crack accommodation capacity.
Minimum surface preparation needed and low labour
Costs
Modified acrylic emulsion polymer specially for modifying cementitious
compositions.
Cement Mortars modified with Indofil MC-76 are hard, tough and durable
compared with unmodified mortars. They are especially useful where thin
sections are desirable and where excessive vibration and heavy loads are
encountered.
Sika® CemCrete is an acrylic product when added to
cement improves properties of cement
slurry/mortar/concrete making them excellent choice
for use in new construction as well as refurbishment
work.
APCOBUILD GYPBIND
APCOBUILD TERRACOAT
CORCHEM 206 I is a single component, high solid content moisture cured polyurethane based tar extended elastomeric protective coating system , ideally suited for waterproofing of roof , walls and foundation conforming to ASTM C-836-03 and ASTM
C 898-09
CORCHEM 206 I SHALL BE APPLIED DIRECTLY
FROM DRUM.
On drying, CORCHEM 206 I forms a seamless
elastomeric protective and waterproofing
membrane.
CORCHEM 206 I being viscous, it can be easily
applied on vertical surface. It has excellent
adhesion to dry as well as primed surfaces of
concrete, tile, plaster, masonry, mastic coating
and metal.